Storing a binary configuration file on a TFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit.
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the TftpServerInetAddressType dialog, click the applicable address type
5. In the TftpServerInetAddress field, enter the TFTP server IP address.
6. In the BinaryConfigFilename field, enter the configuration file name.
7. In the BinaryConfigUnitNumber field enter the stack unit number or, for a stand-
8. In the Action box, select upldConfig.
9. On the toolbar, click Apply.
Storing a binary configuration file on a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit .
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the BinaryConfigFilename field, enter the configuration file name.
5. In the BinaryConfigUnitNumber field enter the stack unit number or, for a stand-
6. In the UsbTargetUnit field, enter the stack number where the USB device is
7. In the Action box, click the upldConfigtoUsb button.
8. On the toolbar, click Apply.
Fundamentals
button.
alone switch, enter 0.
alone switch, enter 0.
inserted.
Enterprise Device Manager configuration files
December 2011
65