Configuration files fundamentals
Storing current ASCII configuration on a TFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the TFTP server address and the
5. Double click the ScriptManual field and then choose Upload from the list.
6. On the toolbar, click Apply.
Storing current ASCII configuration on a SFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the SFTP server address and the
5. Double click the ScriptManual field and then choose Upload from the list.
6. On the toolbar, click Apply.
Storing current ASCII configuration on a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type usb://<filename> to store the
62
Fundamentals
configuration file name in this format: tftp://<ip address>/<filename>. The
entry is limited to a maximum of 327 characters.
configuration file name in this format: sftp://<ip address>/<filename>. The
entry is limited to a maximum of 327 characters.
configuration file on a USB device in a stand-alone unit or usb://<unit
Comments? infodev@avaya.com
December 2011