User interface fundamentals
Prerequisites
• An available TFTP server— ensure that the TFTP path differs from the path you use to
download switch software, or
• A USB mass storage device and switch equipped with a USB port
Caution:
Do not install EDM help files on PCMCIA or Flash.
Procedure
1. To obtain EDM help files for the embedded element manager, do one of the
2. Do one of the following:
3. Unzip the help file in the TFTP server directory.
Configuring the path to the help files using ACLI
About this task
Use the following procedure to configure the path to the help files.
Procedure
1. Open an ACLI session.
2. Enter the Global Configuration mode.
3. At the command prompt, enter the following ACLI command:
Variable Definitions
path name
52
Fundamentals
following:
• Go to the Avaya Web site
for the appropriate product.
• Select the help file from the software CD ROM.
• Download the help file to a TFTP server.
• Download the help file to a USB mass storage device.
edm help-file-path <path name> <tftp address | usb>
<filename>
Field
Comments? infodev@avaya.com
http://support.avaya.com
Description
Specifies the path name you created for
EDM help files. The path name is stored in
NVRAM.
and locate the help files
December 2011