ACLI quick reference
sntp enable
show sntp
Configure log settings
Perform the commands in the following table to configure log settings.
logging volatile overwrite
logging remote address
<A.B.C.D> <WORD>
logging remote level
informational
logging remote enable
logging remote secondary-
address <A.B.C.D> <WORD>
Configure Secure Socket Layer (SSL)
Perform the commands in the following table to configure SSL.
ssl certificate
82
Fundamentals
Command
Command
Command
Comments? infodev@avaya.com
Purpose
Enable SNTP.
Display SNTP settings SNTP. The SNTP
default setting is Greenwich Mean Time
(GMT).
Purpose
Allow log to roll over when buffer is full.
<A.B.C.D.> is the IP address of the remote
syslog server. <WORD> is the remote host
IPv6 address—maximum 45 characters.
Log all events.
Enable syslogging.
<A.B.C.D.> is the IP address of the remote
syslog server. <WORD> is the remote host
IPv6 address—maximum 45 characters.
Note:
The configuration of the secondary
address is independent of the
configuration of the first address (logging
remote address command), i.e. you can
configure the secondary address without
configuring the first address.
Purpose
Create a certificate on the next startup. For
switches that include a secure Web server
Avaya recommends that you replace the
December 2011