Avaya 4550T-PWR+ Fundamentals page 35

In the work area for any of the Edit > Chassis > Ports tabs, the following two panes appear
in the default view:
• Multiple Port Configuration pane—provides port selection for one port, several ports, or
all ports, and configurable port parameters
• Tab work pane—displays existing configuration information for the feature and
configurable cells for individual ports
With Multiple Port Configuration you can perform the following:
• Hide non-editable fields from the multiple configuration pane so that you choose to view
only those fields that can be configured.
• Select an individual port or a group of ports from the Port Editor.
• Select all ports from the Port Editor, if you are on a feature tab. If you used Edit > Chassis
> Ports you already selected the ports on the Device Physical View.
• Double-click any or all of the editable fields to change the configuration parameter.
• Clear your selections.
• Apply your selections.
• Undo the application of your selections.
You can expand or collapse the Multiple Port Configuration pane by clicking the Multiple Port
Configuration task bar. The Multiple Port Configuration pane is expanded by default.
The following figure displays the tabs available in the Edit > Chassis > Ports work flow, with
the Interface tab selected and the Multiple Port Configuration pane expanded.
Figure 11: Interface tab - Multiple Port Configuration pane expanded
The following figure displays the Edit > Chassis > Ports > Interface tab with the Multiple
Port Configuration pane collapsed.
Fundamentals
Enterprise Device Manager concepts
December 2011 35