Brake Pedal Removal/Disassembly - Honda CRF110F Service Manual

Install the wear indicator plate (1) onto the brake cam by
aligning its wide tooth with the wide groove in the brake
oam.
REAR WHEEUBRAKE/SUSPENSION
Install the brake arm [11 by aligning the punch marks on
~~~~;==~;~~~~~;;;;~~
the brake arm and brake cam.
Install the brake arm pinch bott [21 and nut [3]. then
lighten the nut to the specified torque.
TORQUE: 9.9 N'm (1.01 kgf'm, 7.3 lbHt)
Instalilhe brake arm cover [4}.
Apply 0.1 ·0.2 9 of grease to the brake cam and brake
~=========~12:=1=====~
shoe contact area and anchor pin.
Assemble the brake shoes [11 and springs (2] in the
direction as shown.
Install the shoe assembly onto the brake panel.
Wipe any excess grease from the brake cam and
anchor pin .
Instalilhe rear wheel (page 15-9).
BRAKE PEDAL
REMOVAUDISASSEMBLY
Remove the brake pedal adjusting nut [1J.
Push the brake pedal down and remove the brake rod
[2] from the brake arm.
Remove the spring [3], washer [4] and joint pin [5].
15·13