Nuts, Bolts, Fasteners; Wheels/Tires; Steering Head Bearings; Recommended Tire Pressure And Tire Size - Honda CRF110F Service Manual

NUTS, BOLTS, FASTENERS
Check thai all chassis nuts and bolts are tightened to
their correct torque values (page 1-9).
Check that all safety clips, hose clamps and cable stays
are in place and properly secured.
WHEELS/TIRES
Tire pressure
should
be
checked
when the tires ere
cold.
Support Ihe motorcycle using a hoist or equivalent,
raise the front wheel off the ground .
Hold the front fork leg and move the front wheel
sideways with force to see if the wheel bearings are
worn .
For front wheel service (page 14-9).
Support the motorcycle using a hoist or equivalent,
raise the rear wheel off the ground.
Hold the swingarm and move the rear wheel sideways ... _ ....
with force to see if the wheel bearings are worn.
For rear wheel service (page 15-6).
MAINTENANCE
Maintenance of spoke tension and wheel trueness are
~==~=iiiiiiiDrir.ii::;':====~~
critical to safe motorcycle operation. During the first 150
km (100 miles), spokes will loosen more
rapidly due to
initial seating of parts. Excessively loose spokes may
result in high speed instability and possible loss of
control.
Inspect the wheel rims and spokes for damage.
Tighten any loose spokes to the specified torque.
TOOL:
[1] Spo ke w rench , 4.5 x 5. 1 mrn 07701 - 0020 200
TORQUE : 3 .2 N'm (0 .33 kg f 'm , 2.4 IbHt)
STEERING HEAD BEARINGS
Check that the
control cables do
not interfere with
handlebar rotation.
Raise the front wheel off the ground by placing a work
stand or box under the engine.
Check that the handlebar moves freely from side to
side.
If the handlebar moves unevenly, binds, or has vertical
movement, inspect the steering head bearings (page
14-26).
3-19