Engine Removal - Honda CRF110F Service Manual

ENGINE REMOVAUINSTALLATION
ENGINE REMOVAL
13-4
Drain the engine oil (page 3-10).
Remove the following.
- l eft crankcase rear cover (page 2-7)
- Drive chain cover (page 2-7)
- Exhaust pipe/muffler (page 2-8)
Disconnect the following:
- Alternator 2P connector [1]
- Ignition pulse generator wire connector (2)
- Neutral switch wire connector 13J
- Crankcase breather hose [4]
Release the carburetor drain hose [5) from the hose
guide 16].
Remove the starter molor cable screw (1] and
disconnect the starter motor cable [2] from the starter
"-'~
.. '
molor.
Remove the screw (3] and disconnect the ground cable
(4] from the starter motor.
Oisconnect the spark plug cap [1).
Remove the two bolls [2) and wire guide [3J. then
release the intake pipe 14] from the cylinder head.
Remove the gasket [S].
Loosen the lock nuts [1 j. drive chain adjusting nuts
[21
and axle nut
[31 .
11]
Push the rear wheel forward .
121
131