Cylinder Installation - Honda CRF110F Service Manual

Inslatt the new piston pin clip [1].
NOTE :
Make sure the piston pin dips are seated securely.
Do not align the piston pin clip end gap with the
piston cu tout.
CYLINDER INSTALLATION
Do
not reuse the
Install the dowel pins [1] and a new gasket [2].
gasket, replace with
a
new ona.
CYLINDER/PISTON
Apply oil to the cylinder bore, piston sliding area, piston
~::;;::::;~::::"'~~~~~~~~~~:~
ring grooves and piston rings whole surface.
Route the cam chain [1] through the cylinder [2].
86 careful not to
Instatt the cylinder over the piston while compressing
damage tM piston
the piston rings with your fingers.
rings and cylinder
bora.
Be careful not to
Instatt the cam chain guide rotter [1], new sealing
:=='=====~~;;:=:;;
drop the guide rollar
washer (2) and cam chain guide rotter pin bolt [3].
into the crankcase.
Tighten the rotter pin bolito the specified torque.
TORQUE : 10 N·m (1 .0 kgf-m, 7 IbHt)
Instatt the cylinder head (page 8-19).
9·9