Clutch Outer/Sub-Gear - Honda CRF110F Service Manual

CLUTCH/GEARSHIFT LINKAGE
Be
careful not to
Remove the following:
lose the clutch _ Rollers [1]
rollers and clutch _ Springs [2]
springs. _
One-way clutch inner [3J
- Washer [4]
Rep/ace the clutch Check the rollers [1 1 for excessive wear or damage.
roil9rs
as a
set.
Measure the one-way clutch roiler 0.0.
SERVICE LIMIT: 4.97
mm
(0.196 In)
Replace the clutch
Check the springs [2] for fatigue or damage.
springs
as a
set.
Check the one-way clutch inner {1] for wear or damage.
CLUTCH OUTERISUB-GEAR
III
[2[
[1
Remove the spring retainer [1] and spring
[21
by
r-~~~~~~~~~~~- ll - I/ - 12 - 1 ~~---'
carefully prying up on the retainer.
• Be careful not to lose the pin [3J.
10-12