Engine Idle Speed; Drive Chain Slack Inspection - Honda CRF110F Service Manual

MAINTENANCE
Apply locl<ing agent to the oil centrifugal filter cover
bolt
[1] threads.
Install the oil centrifugal filler cover 12] and bolls.
Tighten Ihe bolls to the specifted torque.
TORQUE : 5 N'm (0.5 kgf'm, 3.7 IbHt)
Inslallthe right crankcase cover (page 10-8).
ENGINE IDLE SPEED
Inspect and adjust the idle speed after all olher , - - - - - - -- - -- - - - - - - - ,
engine maintenance items have been performed
and are within specifications.
The engine must
be
warm for accurate idle speed
inspection and adjustment.
Connect a tachometer.
Warm up the engine for about 10 minutes.
Tum the throttle stop screw [1 ) as required to obtain the
specified idle speed.
IDLE SPEED: 1,400
±
100 rpm
DRIVE CHAIN
3-12
Amputation hazard. Never inspect or adjust the
drive chain while the
DRIVE CHAIN SLACK INSPECTION
Turn the ignition switch OFF, place the motorcycle on
its side stand and shift the transmission into neutral.
Check the slack in the drive chain lower run midway
between the sprockets.
CHAIN SLACK: 10 - 20 mm (0.4 - 0.8 In)
I
NOTICE
I
Excessive chain slack, 50 mm (2.0 in) or more, may
damage the frame.
11]
10 - 20 mm (0.4 - 0.8 in)
~
~