Gearshift Linkage Removal - Honda CRF110F Service Manual

CLUTCH/GEARSHIFT LINKAGE
Apply oil to the centrifugal clutch lock nut [1] threads
and seating surface.
Inslallths special 1001 using proper bolts or screws.
TOOL:
[2] Clutch center holder 07HMB·HB70100
or
07923-HB3000B
(U .S.A . only)
Inslall and lighten the centrifugal clutch lock nut to the
specified torque using the speciallools.
TOOLS :
[3] loc k nut wrench, 20 x 24 mm 07716.0020100
[4] Extens ion bar 07716-0020500
or equivalent commercially av ailable in U.S.A.
TORQUE: 54 N'm (5.5 kgf'm, 40 IbHt)
If
any of
the centrifugal clu tch lock nut [1] groove is not
iO"--"';;;
aligned with the lock washer tab [21, further tighten the
centrifugal clutch lock nul and align the centrifugal
clutch lock nut groove wi th the lock washer tab.
Bend the lock washer lab against the centrifugal clutch
lock nut groove.
Install the following:
- Engine oil centrifugal filter cover (page 3·11)
- Right crankcase cover (page 1 0·8)
GEARSHIFT LINKAGE
REMOVAL
Remove the clutch (page 10·9).
When removing the
Remove the bolt [1] and gearshift pedal [2].
gearshift pedal,
mark the pedal
position to ensure
the original position.
Clean the gearshift spindle
11]
thoroughly to prevent the
~=~~~'=::;;:;;;:;;;;;;;;;;;;!==~:;~
dirt or dust from entering the engine.
10-26
•
•