Drive Chain Sprockets Inspection - Honda CRF110F Service Manual

MAINTENANCE
3·14
Lubricate the drive chain with Pro Honda chain lube or
equivalent.
Wipe off any excess drive chain lubricant.
LUBRICATE:
PRO HONDA CHAIN LUBE
~O = R = = E=a=U= ' V=A=L=E=N=T====================~
Measure the drive chain distance between a span of 40 r
pins from pin center to pin center with the chain held
40 PINS
taut and any kinked joint straightened.
SERVICE LIMIT: 51 8 mm (20.4 In)
II
o
0 0. 0 0 0 0 0 0 0
\
SPROCKETS INSPECTION
Inspect the drive and driven sprocket tee th for wear or , - - - - - - - - - - - - - -- - - - - ,
damage, replace
jf
necessary.
Never use a new drive chain on worn sprockets.
Bolh chain and sprockets must be in good condition, or
the new replacement chain will wear rapidly.
Check the attaching bolts and nuts on the drive and
driven sprockets.
If
any are
loose, torque them.
Install the drive chain onto the sprockets.
Install the master link [1] and link plate [2].
Install the retaining clip [3] with the open end opposite
the direction of chain travel.
NORMAL
Drive
Inside
[21
(1)
•