Air Cleaner Housing Removal/Installation; Fuel Tank Removal/Installation - Honda CRF110F Service Manual

AIR CLEANER HOUSING
REMOVAL/INSTALLATION
Remove the left fuel tank shroud (page 2-3).
loosen the band screw [1] and release the air cleaner
connecting hose [2) from the carburetor.
Disconnect the crankcase breather hose [1].
Remove the two air cleaner housing mounting bolts [2]
and air cleaner housing (3J.
Ins lallation is in the reverse order of removal.
Tighten the connecting hose band screw until the
band seat on the collar.
FUEL TANK
REMOVAL/INSTALLATION
Remove the following:
- Seat (page 2-4)
- Fuel tank shrouds (page 2-3)
Turn the fuel valve [1] OFF.
Disconnect the fuel hose [2] from the fue l valve.
Disconnecllhe fuel tank breather hose [3] from the hole
on the top bridge.
Remove the following:
- Bolls [4]
- Collars [5]
- Rubber cushions [6)
- Fuel tank [7)
Installation is in the reverse order of removal.
TORQUE :
Fuel tank mounting bolt:
21 N"m (2.1 kgf"m, 161bHt)
FUEL SYSTEM
{2{
6-5