Battery Removal/Installation; Battery Voltage Inspection - Honda CRF110F Service Manual

BATTERY/CHARGING SYSTEM
BATTERY
16-6
REMOVAUINSTALLATION
Remove the left side covet (page 2-4).
Remove the bolt [1J and battery holder plate [2J.
Disconnect the negative (-) cable (3] and then the
positive (+) cable [4J, remove the battery [5].
Install the battery in the reverse order of removal.
Connect the positive (+) terminal first and then
the
negative
H
cable.
VOLTAGE INSPECTION
Measure the battery vollage using a digital mullimeter.
VOLTAGE:
Fully charge d: 13.0 - 13.2 V
Under c harg ed : Below 12.4 V
BATTERY TESTING
Refer to the instructions that are appropriate to the
battery testing equipment available to you.
TOOL:
Battery tester
Micro 404Xl
(U.S.A . only)
BATTERY CHARGING (U.S.A. only)
Remove the battery (page 16-6).
Refer to the instructions that are appropriate to the
battery charging equipment available to you.
TOOL :
Christie battery cha rger
MC101 212T
(U.S.A. only)
131
141
/' --- --..,....c....
151
/
l1t==::::;t
1 11
121