Brake Pedal Removal; Rear Brake Inspection - Honda CRF110F Service Manual

REAR WHEEUBRAKE/SUSPENSION
Place the rear wheel into the swingarm by aligning the
brake panel groove with the swingarm boss.
Place the rear wheel between the swingarm.
Install the drive chain over the driven sprocket.
Apply grease to the rear axle
111
surface.
Install the following:
- Left adjuster plale
- Rear axle
- Right adjuster plate [2]
- Axle nut [3]
Adjust the drive chain slack (page 3- 13).
Tighten the axle nul to the specified torque.
TORQUE: 64 N'm (6.5 kgf'm, 47 IbHt)
~~~~~~~~!~~
Install the washer [1 J and spring [2] onto the brake rod ;
1 31.
Connect the brake rod to the brake arm with the jOint
pin [4].
Install the brake adjusting nut [5J loosely.
Adjust the rear brake pedal freeplay (page 3-16),
REAR BRAKE
15-10
BRAKE PANEL REMOVAL
Remove the rear wheel and then remove the brake
panel (page 15-S).
INSPECTION
Measure the rear brake drum I.D.
SERVICE LIMIT: 96.0 mm (3.78 In)
•