Ignition Switch Inspection; Ignition Switch Removal/Installation - Honda CRF110F Service Manual

IGNITION SWITCH
INSPECTION
Disconnect the ignition switch wire connectors [1).
Check for continuity between Ihe igniUon switch side
connector terminals.
CONNECTION : Red/black - Bluelwhite
There should
be
continuity with the ignition switch ON
and no continuity with
the
ignition switch OFF.
REMOVAlIlNSTALLA TION
Release Ihe wire band [1) and disconnect the ignition
switch wire connectors [2).
Remove the wire band boss 13) and release the ignition
switch wire from the wire guide [4].
Remove the ignition switch [1] from the top bridge by
pushing the two stoppers [2] .
Install the removed parts in the reverse order of
removal.
Inslalithe ignition switch by aligning the tab with the
groove of the lop bridge .
IGNITION SYSTEM
4-9