Table of Contents
Advertisement
Parameter
Low Velocity
High Velocity
Bend
Trig
Delay Control
Minimum Delay
Maximum Delay
Layer Enable
Enable Sense
Enable Min
Enable Max
Opaque Layer
Sustain Pedal
Sostenuto Pedal
Freeze Pedal
Ignore Release
Hold Through Attack
Hold Until Decay
Low Key (LoKey)
This sets the lowest active note for the current layer. This parameter's value cannot be set
higher than the value for HiKey. The standard MIDI key range is C 1—G 9 (0-127). Middle
C is C 4.
High Key (HiKey)
Here you set the highest active note for the current layer. This parameter's value cannot be set
lower than the value for LoKey.
Low Velocity (LoVel)
With this parameter you define the lowest attack velocity at which the layer will be enabled
(generate a sound). The values for this parameter and the next are expressed in the standard
musical dynamics markings, similar to the values available for the velocity maps. Attack
velocities that are below this threshold will not trigger notes. If you set this parameter's value
higher than the HiVel value, the layer will not play at all.
Range of Values
ppp to fff
ppp to fff
Off, Key, All
Normal, Reversed, Pedal
Down, Pedal Up
Control Source list
0 to 25 seconds
0 to 25 seconds
Control Source list
Normal, Reversed
± 127
± 127
Off, On
Off, On, On2, On3
Off, On
Off, On
Off, On
Off, On
Off, On
Program Edit Mode
The LAYER Page
Default
ppp
fff
All
Normal
Off
0
0
On
Normal
64
127
Off
On
On
On
Off
Off
Off
7-25
Advertisement
Table of Contents
