Table of Contents
Advertisement
Program Edit Mode
The Program FX (FX) Page
If you exceed the maximum number of DSP units, the Forte SE will notify you that you have
done so, and no effects will be applied to the program.
Insert
The Insert effect is the effects chain that is applied to the main audio bus. When the Insert
field is selected, you can press the Edit button to edit the current Chain. For details on Chain
editing see Chapter 8, The Effects Chain Editor.
Aux 1, Aux 2
The Aux effect is the effects chain that is applied to the selected auxiliary audio bus. When
the Aux 1 or Aux 2 field is selected, you can press the Edit button to edit the current Chain.
For details on Chain editing see
Auxiliary Send Parameters
The Auxiliary Send parameters determines the level of the program signal sent to the
auxiliary effects chain.
Aux Send
The Aux Send parameter determines the level of the program signal sent to the auxiliary
effects chain.
Pre/Post Insert
The Pre/Post Insert parameter determines the point at which the auxiliary effect is applied to
the signal. When this parameter is set to Post, the Forte SE applies the auxiliary effect to the
signal post-insert, i.e., after the insert effect has been applied. When this parameter is set to
Pre, the Forte SE applies the auxiliary effect to the signal pre-insert.
To hear a program put through two effects in series (i.e., through two cascaded effects),
choose your desired effects for the Insert and either Aux (for whatever Aux you choose,
the other should be set to 0 None), set each bus' Output to Main, and set the Aux Send
parameter to either 0 dB or 100%. Then, set the Pre/Post Insert parameter to Post.
To hear a program put through two effects in parallel (i.e., through two distinct effects),
choose your desired effects for the Insert and either Aux (again, for whatever Aux you choose,
the other should be set to 0 None), set each bus' Output to Main, and set the Aux Send
parameter to either 0 dB or 50%. Then, set the Pre/Post Insert parameter to Pre.
With respect to each other, the Auxes are always in parallel, that is, they cannot be cascaded.
7-14
Ch. 8 The Effects Chain
Editor.
Advertisement
Table of Contents
