Table of Contents
Advertisement
Program Edit Mode
KB3 Editor: The EQ Page
KB3 Editor: The EQ Page
The four column headers on this page represent two shelving bands of equalization and
two parametric bands. The KB3 EQ offered here, though, is not implemented as a true EQ
section; instead, it adjusts the volume of the tone wheels based on frequency. If the tone
wheels are based on sine waves, then this acts similarly to a real EQ.
Each EQ section has Gain (G), Frequency (F), and Width (W) controls. Frequency controls
the center frequency of the band. Width controls the bandwidth. Gain controls the amount
of boost or cut.
7-94
Parameter Group (Available for each EQ band)
Gain
Frequency
Width
Range of Values
-24.0 to 24.0 dB, in 0.2-dB increments
16 to 25088 Hz, in varying increments
-128 to 128 Semitones, in 2-semitone increments
Advertisement
Table of Contents
