Table of Contents
Advertisement
OVERVIEW Page
The Overview Page shows basic settings for 4 of the available Zones. The current Program,
Volume and Panning position of the Zone, along with the state and active keyboard region
can be quickly set on this page. If a Multi has more than 4 Zones, the other Zones can be
accessed by using the Channel/Layer/Zone Up/Down buttons to the right of the display.
Zn and Stat (Zone and Status)
Zn lists the available Zones. The Status parameter determines whether the currently selected
Zone is active or muted. You can set this parameter to either of two states: Active or Muted.
Program
The Program parameter determines the Program to be loaded for the currently selected
Zone. You can set this parameter to any Forte SE Program (1 – 2047). The display shows the
Program number and name.
The Value Jump double button press (Previous and Next buttons) jumps to selecting the first
Program of each Category, as well as the Category Default Program of each Category (if a
Category Default Program has been set).
Low and Hi (Key Range)
The Low and Hi parameters define the key range of the currently selected zone. Keys played
within this range will trigger a note for the selected Zone. The easiest way to change these
values is to select one, hold the Enter button and press the key of the note you wish to enter.
You can set these values with normal data entry methods as well.
You can also set the lowest key higher then the highest key and vice versa. This allows you to
split a Zone into two areas where the lowest and highest keys now define the region that the
Zone does not play on.
Parameter
Status
Program
Key Range
Pan
Volume
Range Of Values
Active, Muted
Program List
C-1 to G9
None, 0 to 127
None, 0 to 127
Multi Edit Mode
OVERVIEW Page
Default Value
Active
-
C-1 to G9
64
127
11-5
Advertisement
Table of Contents
