Table of Contents
Advertisement
Transpose
The Transpose parameter allows you to tune the pitch of the unit in semitones. The value set
here is independent from the value set with the front panel Transpose buttons, and the two
values are cumulative.
User Type
The User Type parameter allows you to show or hide advanced features of the Forte SE. By
default, User Type is set to Regular. Setting User Type to Regular hides advanced features
and makes some modes easier to navigate. Setting User Type to Advanced gives you access to
additional features.
See the chapter for each mode for details on Advanced features in each mode. Setting User
Type to Advanced enables the following features:
• Global Mode: Access the ProgTempo and Sound Sel parameters.
• Program and Multi mode: Access 16 Banks of Favorite Programs and Multis using
the Channel/Layer/Zone Up/Down buttons.
• Program Edit mode: Access all VAST editor pages.
• Multi Edit mode: Access 8 Zones.
FX Mode
The FX Mode parameter determines how the Forte SE responds to interrupts with regards to
effects. You can set this parameter to either Performance or Multitrack.
With FX Mode set to Performance, the Forte SE minimizes disruption of existing effects
when changing Programs, and entry values will not disrupt sustained notes when changing
Programs in Program Mode. When controlling the Forte SE from an external sequencer in
Program Mode, setting FX Mode to Multitrack will minimize effect disruption.
Global Mode
MAIN Page
12-3
Advertisement
Table of Contents
