Table of Contents
Advertisement
Global Mode
STORE
The Select Directory Dialogue
When storing, the Forte SE will prompt you to select a directory in which to store.
There are three navigating soft buttons on the left side of the bottom of the page:
NewDir
Open
Parent
When you have chosen your directory, press the OK soft button to call up the File Name
dialogue (see the following section) and complete the storing process.
The File Name / New Directory Dialogue
When you create a new file in Storage mode, or create a new directory, the Forte SE prompts
you to enter the name. This File Name dialogue appears as shown below:
New file names will default to either FILENAME (after a powerup), or the name of the most
recent file stored or loaded. New directory names will default to either DIRNAME (after a
power up), or the name of the most recent directory created. You can edit the name using the
keypad, alpha wheel, Previous-/Next+ buttons, Left and Right navigation buttons, the Delete
and Insert soft buttons, and the << and >> soft buttons.
Press the OK soft button to finish the operation.
12-22
Create new directory. Calls up the New Directory dialogue
(see the following section)
Opens the highlighted directory
Moves you up one level in the directory hierarchy. If the
display is already at the root directory, this button has no
effect.
Advertisement
Table of Contents
