Table of Contents
Advertisement
Program Edit Mode
KB3 Editor: The COMMON Page
VibChorCtl
Choose On or Off to turn on or off either vibrato or chorus (as selected with the VibChorSel
parameter). You can toggle between on and off using Assignable button 2 (labeled
Vibrato]
VibChorSel
Choose the vibrato or chorus program (there are three of each) you wish to use with this
KB3 program. Note that you must set VibChorCtl (also on the MISC page) to On to hear
the effect. You can select the vibrato or chorus you want using Assignable buttons 3 and 4
(labeled
VolAdjust
Provides an overall volume adjust for the KB3 model. Use this parameter to "normalize" KB3
programs with other programs.
BendRngUp, BendRngDn
Respectively control the upward and downward pitch bend ranges of the KB3 program.
Sustain
Set On or Off to enable or disable response to MIDI sustain (MIDI 64). By default MIDI
sustain (MIDI 64) is sent by Switch Pedal 1.
Sostenuto
Set On or Off to enable or disable response to MIDI sostenuto (MIDI 66). By default MIDI
sostenuto (MIDI 66) is sent by Switch Pedal 2.
LesliePedal
Set the pedal source (Sustain=Switch Pedal 1, CC 64 by default, Sost=Switch Pedal 1, CC 66
by default, Soft=Switch Pedal 3, CC 67 by default) to toggle between Fast and Slow for the
Leslie™ speaker rotation speed.
7-84
On/Off).
[Chorus/Vibrato] Chor/Vib
and Depth).
[Chorus/
Advertisement
Table of Contents
