Table of Contents
Advertisement
Program Edit Mode
The KEYMAP Page
Parameter
Keymap
Transpose
Key Tracking
Velocity Tracking
Alt Method
Stereo
Timbre Shift
Playback Mode
Alt Control
Piano Resonance
Stereo
You'll use this parameter when you're working with stereo samples.
When you set this parameter to On, the KEYMAP page changes slightly:
An additional Keymap parameter appears. The two keymap parameters are distinguished as
Keymap 1 and Keymap 2. The KEYMAP page parameters will affect both keymaps. When
the Stereo parameter is set to On, the OUTPUT page for the current layer will show an
additional pair of Pan parameters.
The Forte SE contains both stereo and mono samples. Keymaps designed for stereo use are
labeled with names beginning with "Stereo" or ending in "Left," "Right," "L," or "R." For
stereo keymap playback, set Stereo "On" and assign corresponding Left and Right keymaps
to Keymap1 and Keymap2 respectively. For keymaps beginning with "Stereo," assign the
same keymap to both Keymap1 and Keymap2. If you select the same keymap for Keymap1
and Keymap2, the Forte SE automatically uses the left side for Keymap1 and the right side
for Keymap2.
7-20
Range of Values
Keymap List
-128 to 127 semitones
± 2400 cents per key
± 7200 cents
Switched, Continuous
Off, On
± 60 semitones
Norm, Rvrs, Bidirectional, Noise
Control Source List
Off, On
Default
1 Piano f Left
0
100
0
Switched
Off
0
Normal
Off
Off
Advertisement
Table of Contents
