Table of Contents
Advertisement
Program Edit Mode
The Arpeggiator Function
Editing Duration Patterns
Press the Edit button when a pattern is highlighted in the DurationPatt field to access the
editor.
The top line of the "Edit:DurationPatt" page shows the pattern number and name. This page
also displays the pattern's total number of steps, as well as pattern direction. Pressing Step-
removes the last step in the list, pressing Step+ inserts a new note step at the end of the list
(the pattern editor remembers the values of removed steps until you save or exit.) Use the
navigation buttons to move between pattern steps, use the Alpha Wheel, alphanumeric pad,
or Previous-/Next+ buttons to enter the note shift amount for each step. Press More to see a
second page for patterns with more than 24 steps.
Press Delete to delete the pattern from memory. Press Rename to rename the pattern and
save. Pressing Save gives you the option to save the pattern or rename and save. To create a
new Duration pattern, edit an existing pattern and choose Rename when saving. Press the
Exit button to return to the ARP2 page. Your pattern will be available in the Duration Patt
parameter.
Press the ArpSave soft button to save your new pattern as an Arp Preset. When you hit Exit
to leave the Program editor, you will be given the option to save a new User Program with
any changes you have made. See
Save User Programs on page 6-14
for details.
Editing Patterns in StepSeq Mode
Many ArpPresets use StepSeq for the ArpMode. In this mode, the ARP2 page will give you
the ability to create a unique Arpegiattor pattern step-by-step. Select a parameter using the
navigation buttons (to change steps, first put the cursor on the Step line, then move left or
right). Use the soft buttons as labelled to add or subtract steps.
7-67
Advertisement
Table of Contents
