Page 54
A0 to C8 (Standard 88-note Keyboard) Move cursor to start of name Move cursor left one space Move cursor right one space (Shift) (Space) (Space) (Shift) Move cursor left one space Move cursor right one space Move cursor to end of name Delete;...
Page 76
The PC3 contains both stereo and mono samples Keymaps designed for stereo use are labeled with names beginning with "Stereo" or ending in "Left," "Right," "L," and "R." For stereo keymap playback, set Stereo to "On" and assign corresponding Left and Right keymaps to Keymap1 and Keymap2, respectively.
Page 77
Many, but not all, PC3 sample roots have been pre-assigned a carefully chosen, fixed alternate sample start or end point that can be selected using the Alternate Switch feature (altControl and altMethod parameters). This feature allows you to control the sample playback start/end time triggered by any control source.
Page 78
Note Start the sample will begin at the pre-set alternate start point (in this case, slightly past the initial chiff). If you set the AltMethod to Continuous, the PC3 will interpolate the sample's starting point based on the position of the Mod Wheel. If the Mod Wheel is 75% of the way up at Note Start, the sample will begin 75% of the way between normal and alternate start points.