Auxfx 1, Auxfx 2 - Kurzweil Forte SE Musician's Manual

Multi Edit Mode

AUXFX 1, AUXFX 2

AUXFX 1, AUXFX 2
The AUXFX1 (Auxiliary Effects 1) & AUXFX2 (Auxiliary Effects 2) pages determine the
behavior of the current Multi's Auxiliary Effects. Each Multi can use up to two Aux Effects
Chains, and the program in each MIDI channel can send its audio to be processed by one
or both of the Chains. Send level and pre/post insert effects settings can be adjusted for the
program in each MIDI channel. By default, the Aux 1 and Aux 2 Chains are determined by
the program in the Aux FX Channel (set on the Multi Common page with the AuxFXChan
parameter). If you don't want to use the Aux Chains from the program in the Aux FX
Channel, you can use the Override parameter to select a different Chain for one or both Aux
effects.
AUX1 Override, AUX2 Override
Normally, the Aux Effects Chains are specified by the program on the specified Aux Effects
channel. When Override is set to Yes, the Chain parameter appears, allowing you to choose a
different Aux effect Chain.
Set Override to Yes to select an override Aux Chain on this page. Set Override to No to use
the Aux FX chain of the specified Aux FX Channel.
11-30
Parameter
Override
Chain
Send Levels
Pre/Post
Range Of Values
Yes, No
See Effects Chains, Appendix F
[p], 0-100%
[p], pst, pre
Default Value
No
0 None
[p]
[p]