Table of Contents
Advertisement
Program Edit Mode
KB3 Editor: The Set Drawbars (SetDBR) Soft Button
Tune
This parameter lets you tune each of the nine drawbars up or down in semitone steps. The
values for the Tune parameter on the DRAWBR page shown above represent standard
drawbar settings on a real B3, as shown in the table below.
Subharmonics
16'
Slider A
KB3 Editor: The Set Drawbars (SetDBR) Soft Button
Press the SetDBR soft button to capture the current position of the drawbars, and use those
positions as the preset drawbar positions on the DRAWBR page.
KB3 Editor: The PITCH Page
The PITCH page parameters for KB3 programs is much like the PITCH page parameters for
VAST programs. The only difference is that for KB3 programs, there are no Hz, KeyTrk, or
VelTrk parameters. For a full description of the PITCH-page parameters, see
Control Parameters on page
The DSP Modulation (DSPMOD) Page on page 7-39.
7-88
Fundamental
5
/3'
8'
1
Slider B
Slider C
Figure 7-2 Standard Drawbar Settings for the Hammond B3
7-32,
Harmonics
4'
2
/3'
2'
2
Slider D
Slider E
Slider F
The DSP Control (DSPCTL) Page on page 7-37
1
/5'
1
/3'
1'
3
1
Slider G
Slider H
Slider I
Common DSP
and
Advertisement
Table of Contents
