Table of Contents
Advertisement
MIDI Page
The Forte SE can transmit and receive MIDI via its MIDI ports and USB. The MIDI page in
Global Mode allows you to configure how this will be handled.
Dest (Destination)
The Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. This data can be sent to the Forte SE sound engine, through
the MIDI out ports, or both. You can set this parameter to NONE (aka Local Off), or any
combination of the three available destinations.
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see
the Multi Mode Destination parameter is set to USB+MIDI+LOCAL and the Global Mode
parameter is set to LOCAL, the MIDI data will only be transmitted locally.
NONE
LOCAL
MIDI
MIDI+LOCAL
USB
USB+LOCAL
USB+MIDI
USB+MIDI+LOCAL
Parameter
Destination
ChangeMultis
Bank Select
PrgChangeMode
LocalKbdChan
SysExID
Destination on page
No MIDI data transmission from the Forte. The Forte can still receive incoming
MIDI data.
MIDI data is sent only to the Forte sound engine. MIDI Out is disabled.
MIDI data is sent only through MIDI Out. The sounds of the Forte are disabled
MIDI data is sent both to the Forte sound engine and through the MIDI Out.
MIDI data is sent only through the USB port. The sounds of the Forte are
disabled
MIDI data is sent both to the Forte sound engine and through the USB port.
MIDI data is sent both to the MIDI OUT and USB port.
MIDI data is sent to the MIDI OUT, USB port. and to the Forte sound engine.
Range of Values
NONE, LOCAL, MIDI, MIDI+LO-
CAL, USB, USB+LOCAL, US-
B+MIDI, USB+MIDI+LOCAL
Immediate, AllKeysUp
Ctl 0, Ctl 32, Ctl 0/32
Extended, K2600
None, 1 to 16
0 to 127
11-7). These parameters act like filters, so if
Global Mode
MIDI Page
Default Value
USB+MIDI+LOCAL
Immediate
Ctl 0/32
Extended
None
0
12-11
Advertisement
Table of Contents
