Kurzweil Forte SE Musician's Manual page 241

Hide thumbs Also See for Forte SE:
Table of Contents

Advertisement

Mode
Switch Controllers have three modes: Off, MIDI CC, or Chord.
With a value of Off, the controller is disabled for this zone.
With a value of MIDI CC, the controller has the ability to transmit MIDI control messages.
Switch controls can also be set to Chord mode. In Chord mode, the switch can play a chord
containing up to 8 notes.
Velocity
The Velocity parameter only appears if the Mode is set to "Chord" and is for use with switch
controllers. Use the Velocity parameter to select a MIDI attack velocity (0-127) for the
note(s) designated in the Key1 to Key8 field(s). Alternatively, set the Velocity field to Auto
and the note's velocity will be the velocity set by the KeyVel Multi Destination (see KeyVel
on
page
11-17).
Key1.....Key8
The Key1, Key2, Key3, Key4, Key5, Key6, Key7, Key8 parameters are available when the
Mode is set to "Chord" . Use the Key(1 to 8) parameters to select the note to be played. The
note is displayed by MIDI note name.
To select a note, select the KeyNum field with the navigation buttons, hold the Enter button
on the alphanumeric pad, then play the desired note on the keyboard. You can also change
the note in the field by using the Alpha Wheel or Previous-/Next+ buttons.
Key
When the Switch parameter is set to a Key (Key1-Key12) and Mode is set to something
other than "Off", the Key parameter appears. Use the Key parameter to select which of the
Forte SE's Keys you wish to use as a switch controller. With the Key parameter selected, you
can set a key by holding the Enter button and striking the desired key.
Do
When the Switch parameter is set to a Key (Key1-Key12) and Mode is set to something
other than "Off," the Do parameter appears. The Do parameter determines whether the key
will play a note and perform a switch function, or whether the key will only perform a switch
function. Set the Do parameter to "Both" to play a note and perform a switch function, or
set it to "OnlySw" to only perform a switch function.
FORTE SE SWITCHES
Sw.Pedal1a
Sw.Pedal1b
Sw.Pedal2a
Sw.Pedal2b
Multi Edit Mode
SWITCH (Switches) Page
Variation Button
ArpSwitch
Switches 1-9
Key 1-12
11-25

Advertisement

Table of Contents
loading

Table of Contents