Table of Contents
Advertisement
Chapter 13
System Mode
CAUTION: DO NOT ATTEMPT TO MAKE ANY CHANGES IN SYSTEM
MODE UNTIL YOU HAVE READ AND FULLY UNDERSTOOD THIS
CHAPTER
This chapter will help you familiarize yourself with the functions of System Mode.
System Mode allows you manage and upgrade the OS software of your Forte SE as well as
perform diagnostic tests of the instrument's various internal systems and processes. Note that
the functions that you have access to in System Mode govern the operation of your Forte SE,
so only use System Mode when you must perform essential maintenance tasks.
To enter System Mode, follow these steps:
1. Power off your Forte SE.
2. Press and the hold the ENTER button, and power on the unit. Make sure to keep
holding the ENTER button until the display shows the following:
3. Release the ENTER button—at this point, you are in System Mode.
FORTE SE System Mode
Run
System
Forte
Update
v.3.44.25695
Run
System
System
Diags
Reset
Utilities
System Mode
13-1
Advertisement
Table of Contents
