Changing The Final Drive Gear Oil - Yamaha 2012 Grizzly 300 Service Manual

CHANGING THE FINAL DRIVE GEAR OIL

1
2
CHANGING THE FINAL DRIVE GEAR OIL
1. Place the machine on a level surface.
2. Place a receptacle under the final gear case.
3. Remove:
• final drive gear filling bolt
• final drive gear oil drain bolt
4. Drain:
• final drive gear oil
5. Install:
• final drive gear oil drain bolt
TIP
Check the gasket (drain bolt). If it is damaged,
replace it with a new one.
6. Fill:
• final drive gear case
Total amount
_
0.15 L (0.16 US qt, 0.13 Imp.qt)
Recommended oil
SAE 80 API GL-4 Hypoid gear oil
NOTICE
Take care not to allow foreign material to
enter the final gear case.
7. Install:
• final drive gear filling bolt
3-43
CHK
ADJ
1
2
30 Nm (3.0 m·kgf, 21.7 ft·lbf)
15 Nm (1.5 m·kgf, 10.8 ft·lbf)