Yamaha 2012 Grizzly 300 Service Manual page 252

2
1
1
STEERING SYSTEM
a
3
4
5
2
3
4
8-33
INSTALLING THE REAR BRAKE LEVER
1. Install:
• handlebar switch
• rear brake lever
TIP
• Installing the rear brake
handlebar switch , handlebar grip
1
rear brake lever are in the positions shown
3
in the illustration.
• Install the rear brake
punch mark and the gap
4
lever holder.
• 65 ~ 66 mm (2.56 ~ 2.60 in)
a
Rear brake lever
13 Nm (1.3 m•kg, 9.4 ft•lb)
2. Adjust:
• rear brake lever
Refer to "ADJUSTING THE REAR BRAKE
LEVER" in chapter 3.
INSTALLING THROTTLE LEVER ASSEMBLY
1. Install:
• throttle lever assembly
TIP
• Install the throttle lever assembly, please align
the punch mark and the gap
1
lever assembly.
• Installing the throttle lever assembly, make
sure the clearance the throttle lever assembly
3 and handlebar grip
Throttle lever assembly
8 Nm (0.8 m•kg, 5.8 ft•lb)
2. Adjust:
• throttle lever free play
Refer to " ADJUSTING THE THROTTLE
LEVER FREE PLAY" in chapter 3.
CHAS
lever, make sure the
, and
2
lever, please align the
at rear brake
5
at the throttle
2
4 .