Yamaha 2012 Grizzly 300 Service Manual page 98

ADJUSTMENT THESELECT LEVER CONTROL CABLE
2
1
a
3
4
2
3-40
AND SHIFT ROD
3. Adjust:
• select lever control cable
• select lever shift rod
Select lever control cable and select lever
shift rod adjustment steps:
Control cable:
a. Make sure the select lever is in NEUTRAL.
b. Adjust the control cable so there is zero
free play in the cable. When the adjust-
ment is correct, slack in the return spring
will be taken up.
1
TIP
In some cases it will be necessary to further
adjust the cable with the locknuts
arrangement that holds the cable to its
mount.
c. When the brake begins to work "
30 mm (0.8 ~ 1.2 in)", verify that the select
lever can be shifted to REVERSE from
NEUTRAL and to NEUTRAL from REVERSE.
d. Before the brake begins to work "
20 mm (0 ~ 0.8 in)", verify that the select
lever cannot be shifted to REVERSE from
NEUTRAL and to NEUTRAL from REVERSE.
e. Check that locknuts
rectly.
f. If the operation of the select lever is incor-
rect, adjust the select lever control cable
with the adjuster
3
CHK
ADJ
2
= 20 ~
a
= 0 ~
a
are tightened cor-
2
.
4