Yamaha 2012 Grizzly 300 Service Manual page 224

1 1
FRONT AND REAR WHEELS
CHECKING THE WHEELS
The following procedure applies to both of the
front and rear wheels.
1. Check:
• wheel
2. Measure:
3
• wheel runout
Over the specified limit
wheel or check the wheel bearing play
2
3. Check:
• wheel balance
Out of balance
After replacing the tire, ride conservatively
to allow the tire to be properly seated in the
rim. Failure to do so may cause an accident
resulting in machine damage and possible
operator injury.
CHECKING THE WHEEL HUBS
The following procedure applies to both of the
front and rear wheel hubs.
1. Check:
• wheel hub
Cracks/damage
• splines (wheel hub)
Wear/damage
Front
Rear
2
8-5
CHAS
Wheel runout limit
Radial 2 : 2.0 mm (0.08 in)
Lateral : 2.0 mm (0.08 in)
3
→
Adjust.
WARNING
1
→
Replace.
→
Replace the wheel hub.
→
Replace the
1 .