Yamaha 2012 Grizzly 300 Service Manual page 255

1
2
STEERING SYSTEM
REMOVING THE STEERING STEM
1. Remove:
• steering stem
TIP
When loosening each tie-rod end nut
the tie-rod ball joint with a 14-mm wrench
CHECKING THE STEERING STEM
1. Check:
• steering stem
Bends Replace.
→
WARNING
Do not attempt to straighten a bent stem;
this may dangerously weaken the stem.
2. Check:
• steering stem bushings
• oil seal
Wear/damage
8-36
CHAS
Replace.
→
, hold
.