Checking The Connections - Yamaha 2012 Grizzly 300 Service Manual

IMPORTANT INFORMATION

CHECKING THE CONNECTIONS

Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
• lead
• coupler
• connector
2. Check:
• lead
• coupler
• connector
Moisture
Rust /stains
several times.
3. Check:
• all connections
Loose connection
TIP
If the pin
up.
4. Connect:
• lead
• coupler
• connector
TIP
Make sure all connections are tight.
5. Check:
• continuity (with the pocket tester)
Pocket tester
Analog pocket tester
TIP
• If there is no continuity, clean the terminals.
• When checking the wire harness, perform
steps (1) to (3).
• As a quick remedy, use a contact revitalizer
available at most part stores.
1-4
GEN
INFO
Dry with an air blower.
→
Connect and disconnect
→
→
Connect properly.
on the terminal is flattened, bend it
90890-03112
YU-03112-C