Yamaha 2012 Grizzly 300 Service Manual page 217

REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
1
3
2
INSTALLING THE FINAL DRIVE GEAR
1.Lubricate:
• Drive shaft
• Coupling gear
• O-ring
• Oil seal
• Bearing
Lithium-soap base grease
2.Install:
• Drive shaft
(to the universal joint)
1
3.Install:
• Final drive gear
• Bolts
ADJUSTING THE BACKLASH
1. Install:
• Final drive pinion gear shim
TIP
Use only shims 2.00 mm (0.08 in) thick.
2.Install:
• Left ring gear shim
Right ring gear shim
•
TIP
Use only shims 1.50 mm (0.06 in) thick.
7-8
DRIV
1
35 Nm (3.5 m • kg, 25.3 ft • lb)
LT
1
2
3