Yamaha 2012 Grizzly 300 Service Manual page 251

3
5
4
STEERING SYSTEM
INSTALLING THE HANDLEBAR
1. Install:
• handlebar
• upper handlebar holders
TIP
• Install the handlebar, please align the punch
mark
• The upper handlebar holders should be
installed with the flange
NOTICE
First tighten the bolt
the handlebar holder, and then tighten the
bolt
6
6
INSTALLING THE HANDLEBAR GRIPS
1. Install:
• rear brake lever
• handlebar grips
TIP
• Before installing the handlebar grips, please
placing the
• Before applying the adhesive, wipe off grease
or oil on the handlebar surface
quer thinner.
• Install the handlebar grips so that the "L" arrow
on the left grip and "R" arrow on the right
grip are placed vertically.
8-32
CHAS
25 Nm (2.5 m · kg, 18.1 ft · lb)
and the gap at handlebar holder
1
forward
3
on the rear side of
5
on the front side.
1
rear brake lever .
.
2
.
4
with a lac-
a