Checking The Fuses - Yamaha 2012 Grizzly 300 Service Manual

Table of Contents

Advertisement

CHECKING THE FUSES

CHECKING THE FUSES
The following procedure applies to all of the
fuses.
NOTICE
To avoid a short circuit, always set the main
switch to "OFF" when checking or replac-
ing a fuse.
1. Remove:
• seat
Refer to "SEAT, FENDERS AND FUEL
TANK".
2. Check:
• fuse
a. Connect the pocket tester to the fuse and
check the continuity.
TIP
Set the pocket tester selector to "Ω × 1".
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
b. If the pocket tester indicates "∞", replace the
fuse.
3. Replace:
• blown fuse
a. Set the main switch to "OFF".
b. Install a new fuse of the correct amperage.
c. Set on the switches to verify if the electrical
circuit is operational.
d. If the fuse immediately blows again, check
the electrical circuit.
3-59
CHK
ADJ

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents