Changing The Final Gear Oil; Checking The Differential Gear Oil Level - Yamaha Grizzly550 User Manual

4. Install:
• Final gear oil level check bolt
Final gear oil level check bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
EAS21470

CHANGING THE FINAL GEAR OIL

1. Place the vehicle on a level surface.
2. Place a container under the final drive case.
3. Remove:
• Final gear oil filler bolt "1"
4. Remove:
• Final gear oil level check bolt
• Final gear oil drain bolt "1"
Completely drain the final drive case of its oil.
5. Check:
• Final gear oil drain bolt gasket
Damage → Replace.
6. Install:
• Final gear oil drain bolt
(with the gasket)
1
7. Fill:
2
• Final drive case
(with the specified amount of the recom-
mended final gear oil)
ECA28P1005
NOTICE
Take care not to allow foreign material to en-
ter the final drive case.
8. Check:
• Oil level
Refer to "CHECKING THE FINAL GEAR OIL
LEVEL" on page 3-25.
9. Install:
1
• Final gear oil level check bolt
• Final gear oil filler bolt
EAS29250
CHECKING THE DIFFERENTIAL GEAR OIL
LEVEL
1. Place the vehicle on a level surface.
2. Remove:
• Differential gear oil filler bolt "1"
3. Check:
• Differential gear oil level
The differential gear oil level should be up to
the brim "2" of the hole.
1
Below the brim → Add the recommended dif-
ferential gear oil to the proper level.
ECA16170
NOTICE
Take care not to allow foreign material to en-
ter the differential case.
3-26
CHASSIS
Final gear oil drain bolt
23 Nm (2.3 m·kg, 17 ft·lb)
Total amount
0.25 L (0.26 US qt, 0.22 Imp.qt)
Periodic oil change
0.20 L (0.21 US qt, 0.18 Imp.qt)
Type
SAE 80 API GL-4 Hypoid gear
oil
Final gear oil level check bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
Final gear oil filler bolt
23 Nm (2.3 m·kg, 17 ft·lb)
Type
SAE 80 API GL-4 Hypoid gear
oil
techsparkstudio.com