Ignition Coil - Checking The Secondary Winding - KTM 2013 690 SMC R EU Repair Manual

20 IGNITION SYSTEM
Ignition coil – checking the secondary winding
20.3
Condition
Ignition coil cylinder 1 is disconnected.
Spark plug connector cylinder 1 has been removed.
Preparatory work
–
Remove the seat. (
–
Take off the side cover. (
Main work
Ignition coil cylinder 1 – check the secondary winding resistance
–
Measure the resistance between the specified points.
Ignition coil pin 2 (+) – Ignition coil pin 3
Ignition coil
Resistance of secondary winding
at: 20 °C (68 °F)
» If the displayed value does not correspond to the nominal value:
600739-13
–
Change the ignition coil.
p. 59)
p. 60)
10.4... 15.6 kΩ
172