Exhaust; Removing The Manifold; Installing The Manifold - KTM 2013 690 SMC R EU Repair Manual

9

EXHAUST

9.1

Removing the manifold

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
9.2

Installing the manifold

Preparatory work
–
Remove the seat. (
–
Take off the side cover. (
Main work
–
Remove cable binders
–
Push the cable to the right. Unplug connector
–
Feed out the cable of the lambda sensor.
202031-10
–
Remove screws
–
Remove the heat shield.
S00061-10
–
Remove nuts
Info
Do not misplace the spacer.
S00069-10
–
Loosen screw
–
Take off the manifold.
S00070-11
Main work
–
Position the manifold with the seals.
–
Position the spacer.
–
Mount and tighten nuts
Guideline
Nut, manifold on cylinder
head
S00069-11
p. 59)
p. 60)
.
1
.
3
of the manifold.
4
.
5
.
1
M8
of the lambda sensor.
2
20 Nm Copper paste
(14.8 lbf ft)
52