Installing Left Engine Case; Installing Oil Pumps - KTM 2013 690 SMC R EU Repair Manual

16 ENGINE
16.5.3

Installing left engine case

16.5.4

Installing oil pumps

–
Mount the dowels.
–
Mount the O-ring
–
Degrease the sealing area. Apply the sealing compound to the left engine case half.
Loctite ® 5910
302132-11
–
Put on the left engine case half. If necessary, tap lightly with a rubber mallet and
turn the transmission shafts.
Info
Do not tighten the engine case sections using the screws.
–
Install the screws
Guideline
Screw, engine case
300075-11
Info
Install the screw in the oil filter housing with a new copper washer.
–
Install pins and internal rotors on both oil pump shafts.
–
Mount external rotors in the engine case.
The marking is not visible after mounting.
–
Mount the oil pump shafts
–
Oil the parts.
300073-10
–
Position both oil pump covers
Guideline
Screw, oil pump cover
–
Install washers
300071-11
–
Mount the oil pump gears
300070-11
.
1
and tighten them diagonally.
2
with internal rotors
1
. Mount and tighten the screws.
3
M5
and pins .
4 5
, washers and lock washers
6 7
M6 10 Nm (7.4 lbf ft)
.
2
Loctite
6 Nm
(4.4 lbf ft)
.
8
146
243™
®