Table of Contents
Advertisement
16
ENGINE
–
Take off the engine sprocket.
–
Take off the clutch slave cylinder and hang it to the side.
Info
Do not kink the clutch line.
Do not activate the clutch lever if the clutch slave cylinder has been
removed.
–
Take off the clutch push rod.
–
Remove screw
–
Remove the electrical connection on the starter motor.
–
Remove screw
–
Take off the ground cable of the starter motor.
S00091-10
–
Release hose clip
–
Pull off the throttle valve body from the rear.
S00092-10
–
Disconnect connector
and the alternator.
–
Remove the cable binders and expose the cable.
S00094-10
–
Pull off spark plug connector
–
Unplug the connector of the engine coolant temperature sensor
–
Unplug the connector of the oil pressure sensor
–
Remove screw
S00093-10
–
Loosen the spring band clamps
Pliers for spring band clamp (60029057100) (
–
Pull off the hoses.
S00096-10
.
8
.
9
.
bk
of the gear position sensor, the crankshaft position sensor,
bl
.
bm
.
bp
using the special tool.
bq
.
bn
.
bo
p. 213)
102
Advertisement
Table of Contents
