15
LIGHTING SYSTEM, INSTRUMENTS
15.7
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
–
Remove protection cap
600610-12
–
Pull bulb socket
–
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
600612-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Pull off connector
–
Take off protection cap
600610-10
–
Detach spring bar
–
Remove headlight bulb
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) (
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Attach the connector.
600611-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
.
1
out of the reflector.
2
out of the bulb socket.
3
p. 97)
.
1
of the headlight bulb.
2
.
3
.
4
p. 177)
p. 97)
p. 177)
p. 98)
p. 97)
p. 98)
99