16
ENGINE
16.1
Removing the engine
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Disconnect the battery. (
–
Raise the motorcycle with the work stand. (
–
Take off the side cover. (
–
Remove the air filter box. (
–
Remove the manifold. (
–
Drain the coolant. (
Main work
–
Loosen the spring band clamp
Pliers for spring band clamp (60029057100) (
S00086-10
–
Remove screws
S00087-10
–
Remove screws
–
Take off the engine sprocket cover.
–
Remove screw
–
Take off the shift lever.
S00088-10
–
Have an assistant operate the rear brake.
–
Bend up the lock washer.
–
Remove nut
–
Remove screws
S00089-10
–
Remove nut
–
Pull out the wheel spindle only far enough to allow the rear wheel to be pushed for-
ward.
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
Info
The rear wheel does not need to be fully removed.
S00090-10
p. 59)
p. 79)
p. 60)
p. 56)
p. 52)
p. 162)
using the special tool. Detach the radiator hoses.
1
.
2
.
3
.
4
with the lock washer.
5
.
6
. Remove the chain adjuster.
7
p. 11)
p. 213)
101