Installing The Engine - KTM 2013 690 SMC R EU Repair Manual

16 ENGINE
16.2

Installing the engine

–
Remove nut
–
Remove screws
–
Remove the engine bearer on the left and right.
S00097-10
–
Position the floor jack under the engine and fix it using the special tool.
Floor jack attachment (75029055000) (
300222-10
–
Remove nut
S00099-10
–
Remove screw
–
Remove the swingarm pivot.
S00098-10
–
Lower the engine.
Info
You should have an assistant for this step.
Make sure that the motorcycle is sufficiently secured against falling over.
Protect the frame and attachments from damage.
S00095-10
Preparatory work
–
Raise the engine onto the special tool and fix it.
Floor jack attachment (75029055000) (
.
br
.
bs
and screw of the lower engine bracket.
bt ck
of the swingarm pivot.
cl
p. 217)
p. 217)
103