Table of Contents
Advertisement
16
ENGINE
Main work
–
Position the engine in the frame.
Info
You should have an assistant for this step.
Make sure that the motorcycle is sufficiently secured against falling over.
Protect the frame and attachments from damage.
–
Mount swingarm pivot.
–
Mount the screw
S00098-11
–
Install the screw
yet.
S00099-11
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (
300222-10
–
Position the engine bearer.
–
Mount and tighten screws
Guideline
Screw, engine bearer on frame
–
Mount and tighten screw
Guideline
Engine carrying screw
S00097-11
–
Tighten the swingarm pivot.
Guideline
Screw, swingarm pivot
–
Tighten the lower engine bracket.
Guideline
Engine carrying screw
–
Position the hoses of the engine breather, the SLS and the oil return line. Mount
the spring band clamps
Pliers for spring band clamp (60029057100) (
S00096-11
of the swingarm pivot but do not tighten yet.
1
and nut
of the lower engine bracket, but do not tighten them
2
3
.
4
M10
with nut
.
5
6
M10
M12
M10
using the special tool.
7
p. 217)
45 Nm
(33.2 lbf ft)
45 Nm
Loctite
®
(33.2 lbf ft)
80 Nm (59 lbf ft)
45 Nm
Loctite
®
(33.2 lbf ft)
p. 213)
104
243™
243™
Advertisement
Table of Contents
